Servicing Fire Extinguishers and Your Obligations

I want to present the key topic of serving your extinguishers in the following chapters, and why it is so important. Visit Francis Fire Protection Services Ltd.

I’ll go into a little more depth as well and pose certain kinds of things that you can look at when it ‘s time for you to serve your own extinguishers.

With this I’ll look at the relevant BSI standards and why you need to know about them.

Service and maintenance isn’t something that you should cut corners with. Ideally you’ll never need to use your fire extinguishers, but if / when you do, you’ll need to make sure they ‘re safe and readily available.

Applicable BSI praxis codes

You need to make sure that they operate in accordance with the British Standard Code of Practice 5306 Part 3-‘ 09 before you even consider selecting anyone to perform your extinguisher maintenance.

BS 5306 is the set of BSIs British Standards relating to fire extinguishing facilities and related equipment. The Code of Practice for any commissioning and maintenance of portable fire extinguishers is section 3.

This is the part which is likely to be the most relevant to your fire extinguisher service needs, as many people use mobile units.

Assessments carried out during the service

Choosing someone who works within the BSI Code of Practice helps you meet your workplace health and safety requirements.

It is also important to realize more what kind of work needs to be done on your own devices.

Nearly all varieties of fire extinguishers need to be checked for pressure, mass and any obvious warning signs of problems including dents or corrosion.

Almost all components, pipes and hoses need to be examined to make sure they are working properly and labeling really needs to be checked to make sure they are still readable easily. You can even inspect cartridge-based units inside by opening them up, but don’t try this by yourself.

If the above suggestions are reviewed at least once a year then your service will have done the job. You will be secure in the knowledge that they will be available and in excellent working order should you ever wish to use your equipment.

Many similar issues to remember

One thing that’s easily forgotten is that units based on water and foam that aren’t inside a heated winter location will freeze.

These types of models need to use a low temperature additive to avoid freezing.

Units with carbon dioxide require 10 years of traditional maintenance. A hydro-static examination must then be carried out after that.

Though it is usually a good plan to exchange the extinguisher for a new one after this time period. There comes a time when your units age where changing them is safer and cost-effective.

Keep in mind that they can even recycle your unused extinguishers.